+86-13631634942     quanyi l@funpack.com.cn
PRODUCT DETAILS
You are here: Home » Products » Consumer Electronics Battery » 1s1p 3.85V 1200mAh Lithium Ion Battery Pack for Wearable Device Embedded

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

1s1p 3.85V 1200mAh Lithium Ion Battery Pack for Wearable Device Embedded

This is our newly designed polymer battery pack. With the latest structural design, the battery capacity of 1200mAh

is made in a very small size, which is suitable for the internal layout of various small-size electronic products. Battery can also be used in medical products and wearable products, and is suitable for various Bluetooth headset trackers, etc.

 
Availability:
Quantity:
  • APP00367

  • FUNPACK

Product Description

Long Life Li-ion Polymer Battery For Intelligent Wearable Device 3.85V 1200mAh


Product Description:

This is our newly designed polymer battery pack. With the latest structural design, the battery capacity of 1200mAh

is made in a very small size, which is suitable for the internal layout of various small-size electronic products. Battery can also be used in medical products and wearable products, and is suitable for various Bluetooth headset trackers, etc.


Product Parameters:

Item Specification
Battery Pack Type 1S1P Embedded
Cell Type 1S1P
Capacity 1200mAh(min)
Standard Current 240mA(0.2C)
Maximum Charging Current
Charge Voltage 4.4V@ 0ºC ~ 20ºC, cut off 24mA Recharge trigger voltage: 4.2V 240mA (0.2C)
Charge Voltage 4.4V@21ºC ~ 45ºC, cut off 24mA Recharge trigger voltage: 4.2V 1200mA (1.0C)
Charge Voltage 4.3V@46ºC ~ 55ºC, cut off 24mA 600mA (0.5C)
Pre-Charge Voltage 3.0V@ 0ºC ~ 55ºC 240mA (0.2C)
Maximum Discharging
Discharge Current - @ -20ºC ~ 10ºC 1200mA (1.0C)
Discharge Current - @ 10ºC ~ 60ºC 2400mA(2.0C)
Nominal Voltage 3.85V
Suggestive Discharge Cut off Voltage
Discharge End of Voltage for Device set up 3.2V ~ 3.4V
End of Voltage (Discharge SOC = 0%) 3.0V
Cycle life After 500 cycles (Under 23±2 ºC)
Operating Temperature
and Humidity Range
Charge: 0 ~ 60ºC Humidity: Less than 85% RH
Discharge: -20 ~ 60ºC Humidity: Less than 85% RH
Storage Temperature  and Humidity Range
When stored within 1 Month (3.7V ~ 3.9V) -20~ +60ºC
When stored within 3 Month (3.7V ~ 3.9V) -20~ +30ºC
When stored within 12 Month (3.7V ~ 3.9V) -20~ +25ºC
Impedance < 150mΩ
Shipment Voltage 3.75V ~ 4.0V
NTC NTC 100K, Bv:4250K


PCM:

Item Specification Parameter Unit
Operating Temperature
25 ºC
Over Charge Voltage Protect Detect Voltage 4.475±0.02 V
Delay Time 0.7~1.3 Sec
Release 4.475±0.02 V
2nd Over Charge Voltage Protect Detect Voltage 4.55±0.02 V
Delay Time 0.55~2.0 Sec
Release 4.35±0.05 V
Over Discharge Voltage Protect Detect Voltage 2.8±0.035 V
Delay Time 14~26 mSec
Release 3.0±0.035 ----
2nd Over Discharge Voltage Protect Detect Voltage 2.5±0.05 V
Delay Time 32~128 mSec
Release 2.9±0.05 ----
Over Charge Current Protect Detect Current 2.125~2.875 A
Delay Time 11~21 mSec
Release Disconnect Charger ---
2nd Over Charge Current Protect Detect Current 1.96~3.15 A
Delay Time 8.8~32 mSec
Release Disconnect Charger ---
Over Discharge Current Protect Detect Current 2.8~3.8 A
Delay Time 8~16 mSec
Release Remove R-Load or Connect Charger ---
2nd Over Discharge Current Protect Detect Current 2.5~3.8 A
Delay Time 8~16 mSec
Release Remove R-Load or Connect Charger ---
Short Circuit Detect Current External Short A
Delay Time 175~400 μSec
Release Remove R-Load or Connect Charger ---
2nd Short Circuit Detect Current External Short A
Delay Time 196~364 μSec
Release Remove R-Load or Connect Charger ---
Power Consumption


Operating Mode
12.0 (max) μA
Power Down Mode
0.5(max)

μA



Main Applications :

It is suitable for automobile remote control, electronic dictionary, electronic watch, electronic toys, electronic clock, electronic

health scale, blood glucose meter, electronic thermometer, calculator, TIntelligent voice speaker and electronic dictionary

and translatorand other small household appliances


FAQ:

Q1: Can I have a sample order?
A:
Yes, we welcome sample order to test and check quality. Customized is available.
Q2: What about the lead time?
A: Sample needs 7-12 days, mass production time needs negotiation.
Q3: How do you ship the goods and how long does it take to arrive?
A: We usually ship by JEC. It usually takes 13-15 days to arrive. Airline and sea shipping also optional.
Q4: How to proceed an order?
A: Firstly let us know your requirements or application. Secondly we quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly we arrange the production.
Q5: Is it OK to print my logo on product?
A: OK, Need customer provide their packaging or we make neutral packaging.
Q6: Where can I get the price?
A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us

   or tell us in your email so that we'll regard your inquiry priority


Home
Add: Room 401, Building4, No.45Kuiqing Road, Qingxi Town, Dongguan City, Guangdong Province   
Email: wuyl@funpack.com.cn /  sale@funpack.com.cn  Tel: +86-0769-87298756   Phone: +86-13631634942 
Copyright © 2023 Dongguan Funpack Elec Co.,Ltd.   Privacy Policy |  Sitemap
Supported by leadong.com